How to Make Gold Chrome Wonder Woman Accessories – Step-by-Step Guide

Introduction

Create shiny, metallic-inspired Wonder Woman accessories using EVA foam and gold chrome vinyl! In this tutorial, Susie (@susie_creates_cosplay) demonstrates how to make gold chrome bracelets using Big Z Fabric's Bright Gold Mirror Chrome Vinyl.

The technique involves creating a pattern, shaping EVA foam, covering it with vinyl, and assembling the pieces to achieve a polished metallic look.

Materials Needed

Fabrics and Main Materials

• Big Z Fabric Bright Gold Mirror Chrome Vinyl
• EVA foam (4mm and 2mm thicknesses)

Additional Materials

• Duct tape for creating the pattern
• Spray adhesive
• Contact cement
• Leather or vinyl for straps
• Cotton fabric for optional interior lining

Closures

• Button studs or Velcro

Step 1: Create Your Pattern

Begin by making your own pattern using duct tape. Shape the pattern according to the bracelet design you want to create.

Once your pattern is ready, use it as a guide for tracing the shapes onto the EVA foam.

Step 2: Trace the Shapes onto EVA Foam

Trace your pattern pieces onto the EVA foam, using both 4mm and 2mm thicknesses as needed for your design.

Make sure to include an additional allowance for gluing and overlapping the pieces during assembly.

Cut out all the foam shapes carefully.

Step 3: Cut the Gold Chrome Vinyl

Using your foam pieces as a guide, trace and cut the corresponding shapes from the Bright Gold Mirror Chrome Vinyl.

Leave additional working allowance around all sides of each vinyl piece. This extra material will allow you to wrap and secure the vinyl around the foam.

Trim the vinyl pieces that require a glue allowance so they can be properly attached to the foam.

Step 4: Apply Spray Adhesive

Use spray adhesive to attach the vinyl to the foam.

Generously spray the front side of the EVA foam and the back side of the vinyl.

Allow the adhesive to dry briefly according to the instructions on the can. Susie mentions that this usually takes around one to two minutes.

Step 5: Attach the Vinyl to the Foam

Carefully align the vinyl with the foam, making sure the additional allowance is positioned correctly.

Press the materials firmly together, paying particular attention to the edges and areas where the vinyl needs to wrap around the foam.

Make sure the vinyl is properly secured and smooth against the surface.

Step 6: Trim the Excess Vinyl

Once the vinyl is attached, trim away the excess material.

Clean up the edges so each covered foam piece has a neat and finished appearance.

Step 7: Assemble the Bracelet Pieces

Use contact cement to assemble the individual vinyl-covered foam pieces.

Carefully join the sections together to create the final bracelet structure.

Step 8: Add Straps and Closures

To finish the bracelets, attach your preferred straps using leather or vinyl.

For closures, Susie suggests using either button studs or Velcro, depending on your preferred design and functionality.

Step 9: Add an Optional Interior Lining

For an additional finishing detail, you can add a fun cotton lining to the inside of the bracelet.

This gives the interior a decorative touch and completes the accessory.

Tips from the Creator

• Create your own duct tape pattern to achieve the desired bracelet shape.
• Use 4mm and 2mm EVA foam for the project.
• Include a gluing overlap allowance when tracing your shapes onto the foam.
• Leave additional working allowance when cutting the vinyl.
• Allow the spray adhesive to dry briefly according to the can instructions, usually around one to two minutes.
• Carefully align and press the vinyl onto the foam, especially around the edges.
• Use contact cement to assemble the vinyl-covered pieces.
• Finish with leather or vinyl straps and button studs or Velcro closures.
• Add cotton lining to the interior for an extra decorative detail.

Final Result

A pair of shiny, gold chrome Wonder Woman-inspired bracelets made with EVA foam and Big Z Fabric's Bright Gold Mirror Chrome Vinyl. The combination of foam construction and mirror-finish vinyl creates a metallic appearance, while the straps, closures, and optional cotton lining complete the accessories.

Susie also encourages exploring other metal-look cosplay projects using this technique!